CLUB (.400) - Battle Of The Mopar
CLUB (.400)



Home Introduction General Regulations Race Procedures Motor Requirements & Specs. Official Rules News

Upcoming Events Race Results Media Contact Us Slot Links Drag Board

 

 

DESIGNATION:

BOTM - preceded by car number.

*BODY: Reserved for 1964 - 1971 Chrysler, Dodge, Plymouth 1/24th or 1/25th scale domestic production hardtop coupe or sedans only. All bodies must be of a kit based model or dealer promo only. Dodge Daytona, Plymouth Superbird, Concept, Vacuum Form Styrene, 3D printed or resin bodies are prohibited. No modification to body, other than grinding out inside of body to lighten. Any body deemed questionable must be authenticated by tech committee before the event.

*INTERIOR: Mandatory, Painted 3D driver.

*WINDOWS: Blackout windows not allowed. Front and rear glass must be the kit supplied stock pieces; factory clear or tinted. No lexan, sheet styrene or vac-formed replacements allowed. Addition of side windows allowed; styrene or lexan.

*HOOD SCOOP: Mandatory, Must be forward facing factory style hood scoop i.e. Hemi, Shaker, Twin, Etc. No rear/side-facing or cowl induction style allowed.

*SPOILERS: Aftermarket spoilers not allowed, other than OEM.

*CHASSIS: Unlimited; Motor must be mounted in an inline configuration; ball bearings allowed. Belly pan prohibited.

*FRONT WHEELS/TIRES: Required; Wheel Hub Diameter 5/8 minimum diameter.

*REAR WHEELS/TIRES: Wheel Hub Diameter 5/8, Tire Diameter Minimum diameter 1- 1/16" (1.0625"). Minimum tire tread width fully contacting track surface, 1/2" (0.500") Slitting or grooving of tread area of tires prohibited.

*WHEELIE BARS/WHEELS: Permitted; Total length cannot exceed 5" from center-line of rear axle to center-line of wheelie wheels.

*WEIGHT: 120 grams minimum weight.

*MOTOR: ProSlot VR-12 Part Number PS4019 (Bushing Motor). Copper hardware prohibited. Shunt wire, any springs & bushes permitted. Arms and Magnets will be metered/checked for size and legality.

Class will run heads-up on a (.400) Pro Tree.

Click Here: For Motor Requirements & Specifications.

Click Here: For General Regulations.

If there is any area of these rules which needs clarification, please contact Club (.400) Technical Director by e-mail at club400@hotmail.com.

CLUB (.400): TAKING HEADS-UP SLOT CAR DRAG RACING TO THE NEXT LEVEL!!


Copyright 2001 - 2019 CLUB (.400) All Rights Reserved.
Designed & Maintained by: