Competition Truck
CLUB (.400)



Home Introduction General Regulations Race Procedures Motor Requirements & Specs. Official Rules News

Upcoming Events Race Results Media Contact Us Slot Links Drag Board

 

 

COMPETITION TRUCK

 

 

DESIGNATION:

C/T - preceded by truck number.

*BODY: Any 1/24-1/25 Full Size Truck Kit. Pull Back Racer Ford F-150 is permitted, Pull Back Racer GM Silverado is permitted. Truck must have full Bed and Tail Gate. The inside of truck bed may be removed. Styrene may be used to cover the bed.

*INTERIOR: Must have a painted 3D driver installed.

*WINDSHIELD/WINDOWS: Blackout windows not allowed. Front and rear glass may be replaced with clear styrene or lexan. Side windows may be replaced with clear styrene or lexan.

*REAR SPOILER: Rear spoilers are permitted and must be mounted horizontal/straight to the rear tailgate. Rear spoilers must be width of the body and no longer than 1-inch from back of the deck lid. Spill plates cannot measure more than 1/4" tall.

*CHASSIS: Any inline chassis with bearings.

*FRONT WHEELS/TIRES: 3/4" Scale front hubs with minimum 1/16" Orings.

*REAR WHEELS/TIRES: Scale hub only; 1 1/16" minimum tire diameter by .435" minimum width.

*WHEELIE BARS/WHEELS: Permitted; Total length cannot exceed 5" from center-line of rear axle to center-line of wheelie wheels.

*WEIGHT: 125 grams minimum weight.

*MOTOR: Pro Slot VR-12, Part Number: PS4019 (Bushing Motor). Arms and Magnets will be metered/checked for size and legality.

*GUIDE FLAG: One 1" Max.

ART SHAW & TREVOR RICHARDSON RULES!!

CLUB (.400): TAKING HEADS-UP SLOT CAR DRAG RACING TO THE NEXT LEVEL!!


Copyright 2001 - 2018 CLUB (.400) All Rights Reserved.
Designed & Maintained by: