N/SS - preceded by car number.
*BODY: Any 1/24-1/25 1960 to 1970 Domestic car/station wagon with a minimum of 8" from bumper to bumper. Zero alterations to body allowed other then a notch in rear bumper to allow wheelie bar struts. Notch will be no more wider then 1/8" On each side of bumper, and no higher then vertical portion of bumper. No scoops or wings unless they came from factory and are located in factory locations.
*INTERIOR: Must have a painted 3D driver installed.
*WINDSHIELD/WINDOWS: Blackout windows not allowed. Front and rear glass must be stock kit based. Side windows allowed; clear styrene or lexan.
*CHASSIS: Any inline chassis with bearings.
*FRONT WHEELS/TIRES: 3/4" Scale front hubs with minimum 1/16" Orings.
*REAR WHEELS/TIRES: Scale hub only; 1 1/16" minimum tire diameter by .500" minimum width.
*WHEELIE BARS/WHEELS: Permitted; Total length cannot exceed 5" from center-line of rear axle to center-line of wheelie wheels.
*WEIGHT: 130 grams minimum weight.
*MOTOR: Pro Slot VR-12, Part Number: PS4019 (Bushing Motor). Arms and Magnets will be metered/checked for size and legality.
*GUIDE FLAG: One 1" Max.
ART SHAW & TREVOR RICHARDSON RULES!!